Home filters - RO systems
RO Inox
[ARO-INX-NL]

A Molecular Water Filtration System based on reverse osmosis with a prefiltration, RO membrane closed in housing and postfiltration installed in an ergonomic, stailness steel - inox casing, designed especially for modern kitchens.
Prefiltration is based on patented NewLine cartridges.
In comparison with standard cartridges, NewLine cartridges possess an increased filtration capacity. Additionally, their innovative construction allows for an easy replacement without the necessity to use any tools. Molecular filtration technology filters the source water up to 0,0001 micron and removes e.g. heavy metals, radioactive and carcinogenic elements. Postfiltration takes advantages of activated carbon's adsorping properties and usage of mineralisation technology reintroduces beneficial minerals into water.
This filtration system may additionally be equipped with a permeate pump, which reduces the amount of sewage up to 80%. This very feature of permeate pump makes the whole product extremely environmental-friendly. Permeate pump does not need the electrical power supply, instead using the concentrate pressure to pump clean water to the storage tank. Permeate pump increases the membrane life and the efficiency of the whole water filtration system.
| Data | RO Inox [ARO-INX-NL] |
| Filtration stages | 7 stages of filtration |
| Temperature of feeding water | 2 ÷ 38ºC |
| Type of cartridge | AC-PP-10-5-NL ,AC-SC-10-NL, AC-GAC-10-NL, AC-IL-GAC, AC-IL-MIN |
| Pressure of feednig water | 2,8 ÷ 6,0 bar |
| Maximum water salinity | 2000 ppm (mg/l) |
| Cartridge replacement | Prefilter every 3-6 months Membrane every 2-5 years Postfilter every 6 months |
| DIMENSIONS: Width (cm) Depth (cm) Height (cm) | 33,2 15,0 42,7 |
| Max water flow (litres per day) | Maximum
water flow in all types of RO depends on membrane type: - for 50 GPD membrane is 180 l/day - for 75 GPD membrane is 270 l/day - for 100 GPD membrane is 360 l/day - for 150 GPD membrane is 560 l/day The above specification is applicable for the appropriate temperature, salinity, water pressure (temp. 25ºC, pressure 60psi)* values |
*When the following conditions are met: Hardness < 85 mg/l; TDS < 2000 ppm; Chlorine < 0,1 ppm;
SDI < 5; pH 3 - 11; Fe < 0,01 mg/l; Mn < 0,05 mg/l; Turbidity < 1 NTU
Set includes: faucet, tank and a set of connectors


