Industrial water filters - RO systems

RO 500 GPD
[AIRO-A-500]

Semi-industrial water filtration systems based on reverse osmosis are destined to purify water used for industrial purposes. They are popular with restaurants, laboratories, pharmacies, factories and other places with an increased demand for high-quality water.

The systems are equipped with a special water pump of increased capacity, which allows to obtain water from the local water supply systems. The pump can work in long time cycles and is more efficient than the pumps used in standard RO systems.

The construction of RO 500 GPD allows for the installation of 3-6 membranes, which, in turn, icreases the capacity range of the whole system (from 300 to 600 GPD). RO 500 GPD is equipped with the so-called membrane "auto-flushing" that is initiated every time the filtration process starts. The membrane is automatically rinsed for several seconds, which removes contaminants and bacteria that may appear on the surface of membrane. RO 500 GPD is a perfect solution in bars, restaurants, where clear water is a must.

MODEL	EFFICIENCY PER HOUR (water temp. 25ºC)
RO 300	47 l/h
RO 400	63 l/h
RO 500	78 l/h
RO 600	94 l/h

Data	RO 500 GPD [AIRO-A-500]
Filtration stages	5 filtration stages
Temperature of water supply	+2 ÷ +38ºC
Type of cartridge	AC-PP-20, AC-YRN-20, AC -CTO-20, AC-PL-20, AC-IL-GAC, AC-IL-MIN, AC-IL-BIO
Pressure of water supply	2,8 ÷ 6,0 bar
Maximum water salinity	2000 ppm (mg/l)
Cartridge replacement	Initial every 3-6 months GAC every 6 months Membrane every 2-5 years Final every 6 months
Dimensions: Width (cm) Diameter (cm) Height (cm)	47 28 86

*When the following conditions are met: Hardness < 85 mg/l; TDS < 2000 ppm; Chlorine < 0,1 ppm; SDI < 5; pH 3 - 11; Fe < 0,01 mg/l; Mn < 0,05 mg/l; Turbidity < 1 NTU